Product Name:SLC12HS
Product Code:SLC12HS

• 12 Way Relay                                     • 4 Tone Siren Amplifier.

• 6 Channel Multi Pattern Flasher.       • Compact size 34cmL x 16cmW x 6cmH.

As vehicle fits continue to include more and more electronic equipment, installation and wiring becomes increasingly costly, complex and time consuming. With space in the rear of most vehicles at a premium there are relay packs that need fuse panels, then add siren and flasher units to a combination that occupies space that needed for other equipment, e.g. mobile data, video, ANPR etc., and a complex picture emerges. The solution is the SLC12 which combines all of these in a single compact unit. “One Touch” 999 and ARRIVAL functions are included that can operate multiple relays simultaneously, internal DIL switches enable user selection of which relays are operated allowing the relay pack to be used in any configuration to match your particular application. For example “999” may be programmed to control designated lights and siren, whilst pressing “999” again will return the unit to normal operating condition. On reaching the scene operation of “ARRIVAL” will cancel “999” and set designated lights for fend off. Each relay output is provided with an independent, short circuit protected, Data Recorder output allowing full monitoring capabilities. Designed with versatility as a priority, SLC12 can be controlled by a range of Stirling switch panels, alternatively the relay outputs can be operated via the 12 way control inputs by third party switch panels or relay interfaces*.

The integrated Stirling HLFM6 six channel headlamp flasher offers a choice of user selectable patterns, and operating modes.  There are 3 independent pairs of channels,  each controlled by a separate control line and programming switches.  While the main pair of channels are used for headlamps the remaining 2 pairs can be used for front fog, rear red or other lamps.  The use of solid state switches in this unit simplifies installation and operation by eliminating the necessity of extra external diode bridges in most applications. The 3 selectable patterns, simultaneous, alternating or multi-flash, can be applied independently so any pattern can be applied to any pair of channels, e.g. front headlamps can be set to multi-flash and the remaining channels can be set to alternate mode. An inhibit input is provided to disable the headlamp channels when required. The unit is fully protected against short circuit and over-heating.

The SS2H4 siren amplifier completes SLC12, internal DIL switches provide selection of any combination of 2 or 3 tone operation and sequence. Additional features of Data Recorder output, Radio Transmit Mute and Air Horn over-ride are included as standard. The PA Kit provides an alternative siren control facility that can be used by the observer to operate the siren, the PA mode will override the siren to make voice announcements.

*Contact Stirling EVP for advice on compatibility of your own or existing switch panels.

[ View All Products ]

Product Feedback

Name:

Email:

Message:



Please enter the code you see above into the below box: